熱門關鍵詞：濟南彩鋼板 | 濟南復合板 | 濟南彩鋼瓦 | 濟南c型鋼 | 濟南鋼結構 |
At present, one of the main products of C-shaped steel before connection is steel. It is immediately used in various fields to ensure that production and daily life are not affected by it. So far, people have chosen C-shaped steel mainly because of its quality issues, in order to reduce the possibility of selecting inferior steel. Below, Jinan C-shaped Steel Factory will explain the precautions during the production and processing of C-shaped steel connecting pieces.
Process 1: Feeding
Feeding is the process of placing the materials required for the production of C-shaped steel into the corresponding feeding machine, transferring the materials to the corresponding production equipment, and producing the C-shaped steel. Feeding is a prerequisite for producing C-shaped steel connectors, which immediately affects the subsequent processing technology. Therefore, during the unloading process, raw materials should be selected to ensure that the quality of C-shaped steel is not affected.
Process 2: Forming
Forming is a key link in the production of C-shaped steel connectors. Due to the fact that forming means that the shape of C-shaped steel has already appeared, subsequent processing can immediately act on the formed steel, further improving its performance.
Process 3: Cut off
After being processed in other stages, C-shaped steel connectors have their own performance and can be cut according to actual effects. C-shaped steel is widely used in various fields.
Detail 1: Steel surface layer
The surface of C-shaped steel is a mirror without pits or particles. If such an event occurs, it indicates that there are many impurities in the material used, which immediately affects the quality of C-shaped steel. Therefore, people cannot choose C-type steel connectors, otherwise it will cause various usage failures and increase production costs.
Detail 2: Thickness
When people choose C-shaped steel, they need to choose C-shaped steel based on actual needs. Due to the immediate impact of the thickness of C-shaped steel on its load-bearing capacity. In large buildings, when people need C-shaped steel with good load-bearing capacity, they must choose thick walled steel. If C-shaped steel with thinner wall thickness is selected, it will be completely unable to bear the corresponding weight, which will increase the possibility of accidents.
As long as we pay attention to the two details introduced by the editor of the C-shaped steel manufacturer above, we can ensure that the actual effect is not affected. For more related matters, come to our website http://www.bftlatvia.com consulting service